The 8" SwapTop™ All-In-Wonder™ is the most affordable 8" complete cabbing system on the market. Because of its unique low profile design, the SwapTop can be taken anywhere, but it will still pass muster on the workbench at home.
The All-In-Wonder can be set up as an 8" Flat Lap, a 6 1/2" Trim Saw, and/or a 1" Drum Grinder / Shaper. Each of the three machines can be set up in just minutes.
Water cooled system means no messy oil to clean up. Faster RPM motor allows you to quickly finish the finest cabs possible. This machine includes (almost*) everything you need to start making cabochons today.
Additional Information: Includes everything you need to create a SwapTop 8" Flat Lap, Trim Saw, and Grinder / Shaper.
Max Size: 12" wide x 10" deep x 7" high
Shipping Weight: 20lbs
Motor Type: Permanent Magnet DC, rectified for AC use.
Motor Torque: 48 oz-in (.339 N-m)
Watts In: 245 / Watts Out: 154
Motor RPM: 2,800
Integrated Speed Control for near infinite adjustment
See individual SwapTop machines for more detailed specifications on each configuration.
Two Year Full Confidence Warranty
The motor can be configured with voltage and plug for any country. Be sure to specify which country it is for if not US or Canada.
Item# 10890
Key Features
Quiet and Powerful: Our direct drive Permanent Magnet DC motor is stronger than other machines you will find for two or three times the price. Comes complete with built-in speed controller, and water drip kit.
Quick and Easy: No hassle product assembly, operation is easy and straight forward, and changeover takes only minutes.
As a Flat Lap Machine: Quickly and easily converts to an 8" SwapTop™ Flat Lap Machine with the conversion kit provided. Includes (4) 8" diamond disks plus a polishing pad. (1) 170 Grit 8" Flat Lap (1) 325 Grit 8" Flat Lap (1) 600 Grit 8" Flat Lap (1) 1200 Grit 8" Flat Lap
As a Trim Saw: Quickly and easily converts to a SwapTop™ Trim Saw with the conversion kit provided. Includes (1) 6 ½" x .020" diamond blade.
As an Edger/Shaper: Quickly and easily converts to a SwapTop™ Edger/Shaper with the included conversion kit. Includes (1) 1" 100 grit diamond drum.
Lapidary DB-100™ Diamond Band Saw with a Diamond Saw Blade Improve your faceting results by cutting along the veils for cleaner finished gems. The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade when wet sawing. Uses water for coolant to avoid messy oil clean-up.
To see other combinations of machines and conversion kits, please see our Store.
Inland DB-100 Diamond Band Saw with a diamond saw blade Note: a diamond blade on skin is roughly like running your finger down the edge of a file! It MIGHT cut, but probably won't.
The Inland DB-100 Diamond Band Saw is the perfect saw for intarsia, free form, and even cabbing preforms. Saws hundreds of minerals, from Acanthite to Zircon. Increase your yields on valuable rough with accurate preforms cut right out of the middle of a piece! Improve your faceting results by cutting along the veils for cleaner finished gems. Weighs less than 10 lbs.
Perfect for RVers who like to travel and rockhound. It is rigid and extremely quiet; perfect for an RV park sitting or working in a yard and not bothering neighbors!
Product Uses: * Saw slabs into more unique freeforms with ease * Saw slabs more preciously with less waste * Saw rough gemstone to make faceting easier * Trims stone away for better cabs * Saw gemstone rocks for less loss of gemstone * Saw stone geodes, bottles, sea shells and marbles in half * Saw all types and textures of stained glass * Make stone or glass jigsaw puzzles * Cut multiple pieces simultaneously * Cut intricate pieces and shapes * Reduce scrap by getting the piece on the first try * Cut complex patterns * Make scale stone or brick walls from the real material * Saw tile for authentic scale flooring * Saw ceramic and flooring stone for home installation
Example of no waste in cutting cabs,etc.
Specifications: Model # 91030 Construction: Injection molded, structural grade thermoplastic. Motor: Permanent magnet, speed controlled, up to 2800 RPM. Torque: 48 oz.-in. (.13 HP) Work surface: 9" x 10" Size: 18" high x 10" deep x 12" wide. Weight: 9.0 pounds Throat Depth: 4.75" (12 cm) Cutting Depth: Maximum material thickness: 3" (7.6cm), up to 1" solid slab glass, up to 3" diameter bottle. Minimum Radius: 3/16" (.5 cm) Maximum Radius: 4.75" (12 cm) Cutting Speed: Dependent on material type and thickness. Up to 12"/minute (30.5 cm/minute) Voltage: 110V (Can be converted to 220V on request) Two Year Full Confidence Warranty
Key Features
Comes with a diamond blade for sawing agates, opals, glass, stone, and most other hard materials.
The optional WoodCut™ and MetalCut™ blades saw wood, plastics, fiberglass, leather, non-ferrous metals, thin brass and copper, tin, printed circuit boards and more.
Replaceable BladeSert™ blade guides make the most intricate cuts simple. The upper blade/drip guide is adjustable for varying material thickness.
The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade when wet sawing. Uses water for coolant to avoid messy oil clean-up.
The five part spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup and perfect tracking hour after hour. The spring-loaded tension system acts like a shock absorber to protect and enhance blade life.
The work surface is made of machined aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic.
All frame and interior support walls are extra thick for maximum strength and durability.
The rigid molded housing absorbs and deadens sawing and motor sounds for quiet operation. The plastic construction makes it extremely light weight and easy to handle, so you can take it with you on the road!
The motor type is permanent magnet, high torque, with built in speed control. These are powerful DC motors that more consistently maintain torque as speed decreases.
Integrated internal drain channels and drain tubes collect and funnel excess, dirty coolant away from the blade and prevent it from re-circulating throughout the saw.
Available Parts and Accessories
BladeSert™ Blade Guide NOTE: The BladeSert™ will wear with saw use. The slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert™ for wear each time you use the saw. Immediately replace the BladeSert™ when it begins to show signs of widening and wear. It is also a good practice to use a new BladeSert™ whenever you install a new blade. 37.7" (96cm) Diamond Blade replacement. 96cm WoodCut™ Blade for Band Saw The optional WoodCut™ Blade Allows you to cut woods of all types, make scale wood parts, create wood jigsaw puzzles and much more. We have found that it is the best blade for cutting antlers and bone. 96cm MetalCut™ Blade for Band Saw The optional MetalCut™ Blade allows you to cut metal templates, scale pieces, tubing, and shapes. Cuts non-ferrous metals like copper, aluminum, silver, etc.
Please note: We are dealers of Inland Lapidary products. All items from Inland are brand new, in the box, and shipped directly from the manufacturer. As such, we have access to multiples of any item, and combinations of any items. If you don't see a combination made for what you need, please contact us and we can make one.
Due to the fact that they are shipped from the manufacturer, Inland products may be combined with other Inland products, but they may NOT be combined with any slabs, cabs, gemstones, decals, or anything else.
Payment information: Payment must be received within 15 days of the end of the auction. We accept PayPal (immediate shipping) or Money Orders (3-10 days to clear after we get it) or Checks (10+ days to clear after we get it) We cannot be responsible for postal delays in getting your money order or check!
Shipping information: All UPS orders can only be delivered to Street Addresses, no PO boxes!
If payment is by money order, the item(s) will NOT be shipped until the money order clears! ALL OTHER COUNTRIES Shipping time will most likely be in excess of 20 days. Inland no longer drop-ships outside of the US, so we have to have them ship to us, then we have to ship to you. This is why the shipping time is so high. Also, any country other than Canada must be custom built. Shipping will be by UPS or USPS only. For shipping rates please click on the "calculate" link.
Warranty information Please allow 7-14 days for delivery after processing. Shipping and handling is non-refundable. If the item is the wrong item, we will exchange it. Any damage, non-working problems, or breakdowns after use must be handled through Inland's Customer Service. If the machine has been used at all, it is not returnable! Inland's Customer Service is excellent, please trust them! They have ALWAYS made our customers happy.
If you do not agree with our terms, please do not bid.
If you have questions, we'll be happy to answer them. We will file a non-paying bidder claim after 15 days.
Please see our Store for more great lapidary deals!
Arizona Slabs and Cabs is a subdivison of Columbine-Rosebud Enterprises, Nature's Gifts of Arizona, and Bullseye Archery Winter Address: October thru March: Brenda, Arizona 85348 (Salome area) Summer Address: April through September: Riverton, Wyoming 82501
Website designed and marketed by Columbine-Rosebud Enterprises to the needs and desires of the customers of Nature's Gifts Copyright 2004-2007 @ Nature's Gifts
Auction Images
Select a picture
Item viewed 38 times
Ask Seller a Question
Please login in order to ask the seller a question.
Direct Payment
PayPal
Offline Payment
Mastercard
Paypal
Visa
Shipping
Shipping Conditions
Buyer pays for shipping expenses
Postage
43.27 USD
Insurance
-
Shipping Method
UPS Ground
Shipping & Payment Details
For international shipping, please ask. We will ship overseas. Payment is expected within 15 days.
If you buy multiple items, please let me send you an invoice. I can probably save a little in shipping cost.
Inland equipment cannot be combined with slabs and cabs.
All slabs and cabs can be combined.
The poster, arizonaslabsandcabs, assumes all responsibility for the contents of this listing
Bid on this Item
Diamond Band Saw, trim saw, grinder, AND 8" flat lap!!! The Ultimate 8" All-In-Wonder by Inland.
You must be registered in order to be able to bid.
MEMBERS AREA [
Print View
Watch this Item
Send this Auction to a Friend
;)
